This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Urikar Inflatable Paddleboard

Tutorial Videos



Get Started

How long does this product take to inflate?

It will take shape and inflate in 8 minutes. Then it just takes a few extra minutes to keep pumping to get it to a higher air pressure.  Urikar inflatable SUP can be inflated to 15 PSI.

Is the fin removable?

There are one large center removable fin and two attached side fins. You can customize it for the type of water you are paddling in.

Can I take this product on an airplane?

Absolutely. One of the great things about Urikar inflatable stand-up paddleboards is that they can be taken anywhere, including on an airplane.

What PSI should I inflate my board to?

PSI stands for pounds per square inch and refers to the amount of air pressure your board can hold.Urikar has a maximum air pressure of 15PSI. Although air pressure is not the only factor in the rigidity of your board, it is important and you want to make sure your board has the right air pressure so that it is able to support your weight and perform as it should.If you are a lighter person, it is not always necessary to have the board inflated to as high of an air pressure.

I think my board has a leark...How do I find it?

With your board fully inflated, pour some soapy water over the seams and spread the suds with a rag. Watch for tiny bubbles, that’s where your leak will be.

How do I patch a leak?

Once you’ve found your leak you can now patch it. Your board will come with a repair kit that includes a small PVC patch and some waterproof glue.Deflate your board and make sure it is clean and dry. Then apply a generous layer of glue to the area with the leak. Wait 20 minutes then apply a second coat. Wait another 20 minutes then apply some glue to the PVC patch and press it firmly onto the board. Place something heavy on the patch like a weight or a clamp. Let it sit for 24 hours before inflating the board again.

How do I care for my Urikar paddleboard?

There are only a few things you need to do to properly care for your ISUP. First make sure it is fully dry before packing it away in its carry bag. This will prevent mold and mildew from forming. Second, store it in a dry cool area. Keep it stored out of direct sunlight and away from exposure to the elements, which will just weaken the material over time. Third, it is a good idea to use a 303 protectant spray once in awhile on your board. This can be bought at any boating store and will protect the material from UV rays.

Will I need some kind of screen to project onto?

It's not required. The projector can be used on any flat surface, for example the wall of a room, although for the very best performance a pure-white screen can be used.

Can I take my dos on this product?

Absolutely. Any dog of any size can go on an ISUP.

How much weight can this product hold?

Urikar paddleboard has a weight capacity of up to 330 lbs.



What kind of warranty are you offering?

Our projector is covered by a 1-month money back guarantee for defective device and 1-year hassle-free repair service.